Allmatic ALLDOMUS myAMTbox Guia Del Usuario página 64

HOW TO CONFIGURE MYAMTBOX CLIENT OF A HOME NETWORK (e.g. Wi-Fi HOME, Wi-Fi OFFICE...)
1. Access the network settings
3. Press Wi-Fi Configuration and set "Connect to Wi-Fi"
ATTENTION! YOU WILL NEED TO CLOSE AND EXIT COMPLETELY FROM THE WEB PAGE.
AFTER A FEW MINUTES IT WILL BE POSSIBLE TO CONTACT MYAMTBOX AGAIN VIA THE
SELECTED NETWORK (e.g. Wi-Fi-CASA)
ADVANCED NETWORK CONFIGURATIONS
5. LAN configuration: enable the advanced menu by selecting
"Advanced"
28 / 36
2. Enter the password
(factory first access "administrator")
4. (
Wi-Fi"; (
the MYAMTBOX device (the system will propose all available
networks, select the one you want (eg. Wi-Fi CASA) (
) Please enter your password to access your chosen Wi-Fi
network (e.g. router123456). (
press the "Configure" button
xxxx
e.g.
allmaticdomo-hHfl
6. Automatic. The router will automatically assign the IP
address to MYAMTBOX, to access it via LAN cable
1
) Click on "Wi-Fi configuration" and set "Connect to
2
) Select the network to which you want to associate
4
) To confirm the settings
Wi-Fi CASA
4
6-1620310 - rev.2 - 25/05/2020
3
1
2
3