Start-Up - Tronic TCR 18 A1 Instrucciones De Utilización Y De Seguridad

Do not expose the product to direct sunlight or
moisture.
Only plug the product into car sockets that are easily
accessible, so that you can unplug it easily in case of
an emergency.
P Start-up
ATTENTION! RISK OF OVERHEATING! Make
sure that the connected load has a maximum current
consumption of 3 A (3000 mA).
ATTENTION! If you use the product under max.
loading condition, the product may get hot. This is
normal because in this condition, the product uses
more power and therefore generates more heat.
Plug the product into a correctly installed car socket
that provides the specifications given under "Technical
data". The control lamp
the product is receiving current.
Connect your external devices that should be charged
with the product by plugging its USB plug into the USB
port type A
CAUTION!
If the control lamp
your external devices: This indicate that the product
is in overload or fault condition. Please unplug your
external devices from the product immediately.
GB/IE 20
2
.
1
lights off while connecting with
2
lights up white to show that