universalblue UBE2411-21 Manual De Instrucciones página 41

When installing the unit on a built-in oven, the oven should be
placed between two sections of wood. Remember to leave a
space of at least 45x560mm on the back.
When installing the hob on a built-in oven without a forced fan, make
sure there are air inlets and outlets inside the cabinet.
GAS CONNECTION FOR THE GAS HOB
The connection of the hob to the gas supply must be carried out by a
certified installer. During the installation, it is essential to fit an
approved gas tap to isolate the supply of the hob in order to facilitate
any subsequent maintenance. The connection of the unit to the gas
41