NSK Primado2 Manual De Operación página 20

When Using the Foot Control (FC-73, FC-74)
1) When depressing the Pedal of the Foot Control, the Motor starts to operate. When
depressing the Pedal or releasing it, a short alarm sounds.
2) In the Reverse Mode, the Bur starts rotating in reverse. During this reverse rotation, the
alarm continues to sound.
3) Push the Foot Control Button (Multi Foot Control: blue, silver and green buttons; Single
Foot Control: silver button) to set the Control Unit to the pre-determined function. For
any further information, refer to Step "6-4 Setting the Foot Control"
Foot Control Button (Blue) Foot Control Button (Blue)
● Before using the Foot Control Button, be sure to confirm what function is assigned to that Button in the Sub Panel.
CAUTION
How to confirm the Sub Panel
<Multiple Model>
Foot Control Button Foot Control Button
(Blue) (Blue)
Foot Control Button Foot Control Button
The function setting done by each Button is displayed. For more information on these functions, refer to Step "6-4 Setting the Foot
Control".
<Foot Control not connected>
Foot Control Button Foot Control Button
(Silver) (Silver)
Foot Control Button Foot Control Button
(Green) (Green)
Pedal Pedal
Foot Control Button Foot Control Button
(Green) (Green)
(Silver) (Silver)
Fig.24
Fig.26
<Single Model>
<Foot Control OFF>
This shows that the Motor is switched OFF by the ON/OFF switching
function operated from the Foot Control. Operation by the Foot
Control is not available in this case. In order to operate it by the Foot
Control, touch the Sub Panel or turn the Foot Control ON by the
Foot Control Button.
Pedal Pedal
Fig.22
Fig.23
Fig.25
Fig.27
19