Operating Your Shower; Cleaning - Hansgrohe PuraVida 15771 Serie Modo De Empleo / Instrucciones De Montoje

Operating your Shower

Flow ON/OFF Control
Outlet 1 for example bath tub: Turn the flow control
handle (fig.1a) anti-clockwise to turn the water on
and to increase the flow. Turn it clockwise to decrea-
se the flow and turn off.
Outlet 2 for example handshower: Turn the flow
control handle (fig.1a) clockwise to turn the water
on and to increase the flow. Turn it anti-clockwise
to decrease the flow and turn off.
Temperature Control
Turn the temperature control handle (fig. 1b) anti-
clockwise to increase the water temperature and
clockwise to decrease the water temperature.
Thermostat
The valve automatically adjusts for changes in
flow supply and maintains the outlet set water
temperature.
1
14
a
b

Cleaning

Cleaning materials for Mixers and
Showers
Acids are necessary ingredients of cleaning
materials for removing lime. However please pay
particular attention to the following points when
cleaning mixers and showers:
Only use cleaning material specifically intended
for this type of cleaning - such as Hansgrohe's
Decalcifying Agent, available through the
specialist sanitary trade.
Never use cleaning materials which contain
hydrochloric, formic or acetic acid, as they
cause considerable damage.
Never use Phosphoric acid as it can cause
damage.
Never mix any cleaning material with another.
Never use cleaning materials on appliances with
an abrasive effect, such as unsuitable cleaning
powders, sponge pads or micro fibre cloths.
Cleaning Instructions for Mixers and
Showers
Please follow the cleaning materials manufacturer's
inistructions. In addition pay attention to tlie
following points:
Clean the mixers and showers as and when
required.
The cleaning dosage and time the cleaner needs
to take effect should be adjusted according to
the product and the cleaner should not be left
longer than necessary.
Regular cleaning can prevent calcification.
When using spray cleaner, spray first into a
cloth or sponge never directly onto the sanitary
tapware, as drops could enter openings and
gaps and cause damage.
After cleaning, rinse thoroughly with clean water
to revove any cleaner residue.
Important
Residues of liquid soaps, shampoos and shower
foams can also cause damage, so rinse with clean
water after use.
If the surface is already damaged, the effect of
cleaning materials will cause further damage.
Damage caused by improper treatment will
not be covered by our guarantee.