Electrical Connections; Important - Little Giant MS Serie Manual Del Propietário

Electrical Connections

• Employ an electrician to do the wiring.
• Connect the power cord to a constant source of power
matching the pump nameplate voltage.
• The pump should be connected or wired to its own
circuit, with no other equipment in the circuit.
• Do not connect to a fan or any device that runs inter-
mittently.
• The fuses or circuit breaker should be of ample capac-
ity.
• Connect to a circuit equipped with a ground fault cir-
cuit interrupter (GFCI) if required by code.
• Do not splice into the pump power cord. If necessary
to add additional cord length, use a sealed junction
box to splice marine grade cable to existing pump
cable.
• Do not remove the existing cable supplied with the pump.
IMPORTANT: If the power cord is damaged, the whole unit must be replaced.
INSTALLATION
Electrical Connections
5