Control Panel; Display - OHAUS Guardian 3000 Serie Manual De Instrucciones

EN-8
2.2.

Control Panel

1
2
3
4
1. Display Screen
2. Left Knob: Controls temperature and settings menu.
3. Standby Switch
4. Heater Indicator: Illuminates when heater is running.
5. Hot Top Caution Indicator: Illuminates once the heater temperature reaches
40 ° C.
6. Speed Indicator: Illuminates when stirrer is running.
7. Right Knob: Controls speed.
8. External RTD Probe Port
9. Power Entry Module (PEM)
10. Fuse
11. Accessory Rod Mounting Hole
Note: The top plates are of different dimension and material. Please refer to the
actual product for detail.
2.3.

Display

1
1. Heater Temperature: Switches to external probe temperature when the probe
is plugged in and external probe icon is illuminated.
2. Heat Setting Indicator: Switches heater temperature to heat setting when
illuminated.
3. Single Point Calibration Icon
4. External Probe Icon: Illuminates when the external probe is plugged in.
5. Speed Setting Indicator: Illuminates until stirrer reaches the speed setting.
6. Stir Speed
7
5 6
2
3 4
Guardian
10
8
9
5
TM
Hotplate-Stirrers
6
11