Bosch CSM180 Instrucciones De Funcionamiento Y Seguridad página 6

Do not cut workpieces covered or stained
with gas, oil, solvents, thinners, etc. Ex-
posure to these materials may damage the
transparent guard.
Keep handles dry, clean and free from oil
and grease. Slippery hands cannot safely
control the power tool.
Let the blade reach full speed before con-
tacting the workpiece. This will help avoid
thrown workpieces.
When cleaning do not combine hot metal
chips with combustible materials. The hot
metal chips may ignite combustible materials
and cause a fire hazard.
Do not use dust extraction for operations
where dust may include burning, smoking
or smoldering items like hot metal chips or
sparks. Fire inside the vacuum tank or bag
may occur. Dust may smolder and set vacuum
on fire long after work is completed.
Do not use dust extraction when working
on metal. Chips from cutting metal may be hot
and may spark which may melt plastic adap-
tors, vacuum hoses and may cause a fire in-
side the vacuum tank or bag.
If the transparent guard is missing or dam-
aged do not operate tool and return it to
authorized Bosch service center for repair.
Using tool with damaged or missing transpar-
ent guard can lead to serious personal injury.
Develop a periodic maintenance schedule
for your tool. When cleaning a tool be care-
ful not to disassemble any portion of the
tool since internal wires may be misplaced
or pinched or safety guard return springs
may be improperly mounted. Certain clean-
ing agents such as gasoline, carbon tetrachlo-
ride, ammonia, etc. may damage plastic parts.
grinding, drilling, and other construction
activities contains chemicals known to
cause cancer, birth defects or other repro-
ductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies, de-
pending on how often you do this type of work.
To reduce your exposure to these chemicals:
work in a well ventilated area, and work with
approved safety equipment, such as those
dust masks that are specially designed to filter
out microscopic particles.
6
Some dust created by
power sanding, sawing,