LaserLiner MultiMeter Manual De Instrucciones página 16

D
B C
Maximum limit values
Function
V DC / V AC
A DC
Batteries
1
Replacing the battery / fuses
To replace the battery or fuses, first disconnect the test prods from
their voltage source and then from the device. Undo all the screws
at the rear of the device and replace the battery or replace the
defective fuse by a fuse of the same type and rating. Do not touch
the green pc-board. Also make sure it is kept clean. Close the
housing and carefully screw the meter back together. Do not switch
on the device with the cover open.
F 250 mA / 300 V (Ø 5 mm x 20 mm)
1
2 F 10 A / 300 V (Ø 5 mm x 20 mm)
3 1 x 9V 6LR61 (9V block)
16
EN
A
1
2
3
A Measured value display
(3 1/2 segments, 1,999 digits)
B Low battery charge
C Negative measured values
D Warning: High voltage
Maximum limit values
300 V DC, 300 V AC
10 A DC (> 2 A max. 10 seconds
every 15 minutes)
9 V