Metra 99-5838CH Instrucciones De Instalación página 7

To the 99-5838CH radio trim panel:
1. Attach the engine start/stop trim, the
engine start/stop switch panel, and
then the rubber button membrane.
(Figure A)
2. Secure the engine start/stop circuit
board and cover to the switch/cover
assembly using the (6) #4 x 1/2" Phillips
pan-head screws provided with this kit.
(Figure B)
KIT PREPARATION
(Figure A)
(Figure B)
(CONT.)
3. Insert the USB cable into the USB slot,
through the rear. (Figure C)
4. Attach the (4) panel clips provided with
this kit to the back of the radio trim
panel. (Figure D)
Continue to Kit Assembly
(Figure C)
(Figure D)
REV. 6/30/22 INST99-5838CH
7