After Use; Transport; Storage - Kärcher T 5 Manual Del Usuario

6. Clean the floor area, while guiding
the T-Racer over the floor area with-
out exerting any force.
Cleaning the wall surface
1. Attach the T-Racer directly to the
high-pressure gun.
a Completely unscrew the union
nut.
b Press the bayonet of the T-Racer
into the socket on the high-pres-
sure gun.
c Turn the T-Racer 90° until it clicks
into place.
2. Tighten the union nut.
3. Clean the wall surface.
Height adjustment of rotor arm
The distance between the high-pres-
sure nozzles and the cleaning surface
is changed by the height adjustment of
the rotor arm.
Adjust the height adjustment of the ro-
tor arm according to the cleaning task.
For powerful cleaning of stubborn
dirt on robust surfaces, e.g. tiles,
concrete, stone:
1. Set the height adjustment of the ro-
tor arm to "HARD".
For cleaning sensitive surfaces:
2. Set the height adjustment of the ro-
tor arm to "SOFT".
After use, rinse the device with a soft
jet of water.
 Remove the T-Racer and any exten-
sion tubes from the high-pressure
gun.
 Rinse the T-Racer with the high-
pressure gun (without additional ac-
cessories) or wipe it with a damp
cloth.
WARNING
Risk of injury, risk of damage!
Be aware of the weight of the device
during transportation.
Stow or secure the device in accor-
dance with the applicable guidelines so
that it does not slide or jostle around
during transport.
1. Stow or secure the device so that it
does not slide or jostle around in the
vehicle when accelerating, braking,
cornering or in the event of an acci-
dent.
Store the device in a frost-free place.
English

After use

Transport

Storage

7