Care And Service; Troubleshooting Guide - Kärcher T 5 Manual Del Usuario

Care and service

Installing/removing nozzles
The procedure described applies to all
available nozzles on the device.
1. Remove the clip.
2. Pull out the high-pressure nozzle.
3. Insert the high-pressure nozzle.
4. Mount the clip.
Cleaning the high-pressure
nozzle
1. Remove the high-pressure nozzle.
2. Rinse the high-pressure nozzle with
clear water in both directions. If nec-
essary, replace a damaged high-
pressure nozzle.
3. Install the high-pressure nozzle.
8

Troubleshooting guide

High-pressure cleaner does not
build up pressure or pulsates
High-pressure nozzles clogged or
damaged.
1. Remove the high-pressure nozzles.
2. Check the high-pressure nozzles for
blockages and clean them if neces-
sary.
3. Check the high-pressure nozzles for
damage and replace if necessary.
4. Rinse the T-Racer without jets with
clear water.
5. Install the high-pressure nozzles.
English