AirPro PROGRESS LIGHTING GULLIVER Manual De Instalación página 11

The Reverse switch is located on the motor housing.
Slide the switch to the Left for warm weather operation.
Slide the switch to the Right for cool weather operation.
(Fig. 13)
NOTE: Wait for fan to stop before changing the
setting of the slide switch.
Speed settings for warm or cool weather depend on
factors such as the room size, ceiling height, number of
fans, etc.
Warm weather - (Forward) A downward air flow
creates a cooling effect as shown in Figure 14. This
allows you to set your air conditioner on a higher
setting without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves
warm air off the ceiling area as shown in Figure 15.
This allows you to set your heating unit on a lower
setting without affecting your comfort.
Figure 14
M
Q
Disassembling Your Fan
This fan comes with a pre-assembled blade and front
guard for your easy installation. Check that all screws
are tight and securely in place.
U
Use a lint free lightly damp cloth or duster to remove
E
dust from the blades.
F
G
H
Figure 15
Figure 16
8.