Troubleshooting 10 - AirPro PROGRESS LIGHTING GULLIVER Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Solution
 
 
1. Check circuit fuses or breakers.
Fan will not start.
 
 
2. Check line wire connections to the fan and switch wire connections in the switch housing.
 
CAUTION: Make sure main power is off.
 
 
 
3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency.
 
 
4. Check the battery in the transmitter.
 
 
 
 
Fan sounds noisy.
1. Make sure all motor housing screws are snug.
 
 
2. Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
 
CAUTION: Make sure main power is off.
 
 
 
 
3. Allow a 24-hour "breaking-in" period. Most noise associated with a new fan disappear during this time.
 
 
4. Check that light bulb is also secure.
 
 
 
 
5. Some fan motors are sensitive to signals from solid-state variable speed controls. If you have installed this type of control,
choose and install another type of control.
 
 
 
6. Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
 
Remote control
 
malfunction
1. Do not connect the fan with wall mounted variable speed control (s).
 
2. Make sure the dip switches are set correctly.
 
 
 

Troubleshooting 10.

Publicidad

Tabla de contenido
loading

Tabla de contenido