Unpacking And Checking Contents; Base - Skil DP9505-00 Manual Del Propietário

UNPACKING AND CHECKING CONTENTS

WARNING
and understood the entire owner's manual.
Model DP9505-00 Drill Press is shipped complete in one box.
1. Separate all parts from packing materials and check each one with the "Table of Loose
Parts" to make sure all items are accounted for before discarding any packing material.
WARNING
obtained and are installed correctly .
2. Remove the protective oil that is applied to table, base and column. Use any ordinary
household type grease and spot remover.
WARNING
3. Apply a coat of furniture paste wax to the table, column and machined surfaces of base to
prevent rust. Wipe all parts thoroughly with a clean dry cloth.
Table of Loose Parts
ITEM
A
B
C
D
E
F
G
H
I
J
K
L
To reduce the risk of injury, never connect plug to power source
outlet until all assembly steps are complete and until you have read
If any parts are missing, do not attempt to assemble the drill press,
plug in power cord or turn the switch on until the missing parts are
To avoid fire or toxic reaction, never use gasoline, naphtha, or similar
highly volatile solvents.
Table/Support Assembly
Column & Flange Assembly
Table Support Lock Handle
Feed Handle Rods
Hex Head Bolts (M8 x 20)
Hex Wrench (3 mm)
Hex Wrench (4 mm)
A
F
DESCRIPTION
Head Assembly

Base

Crank Handle
Chuck Key
Chuck
G
E
QTY .
C
I
L
H
1
1
1
1
1
3
1
1
1
3
1
1
B
D
K
J
15