Infiniton SPLIT-2323MF Manual De Instrucciones página 39

Ocultar thumbs Ver también para SPLIT-2323MF:
Tabla de contenido

Publicidad

Notices for installation
Befare installating, please contact with local authorized
maintenance cenler, if unit is not installed by the authorized
maintenance center, the malfunction may not solved,due to
discommodious contact.
The air conditioner must be installed by professionals according
to the national wiring rules and this manual.
Refrigerant leak tesf must be made after installation.
To move and install air conditioner to another place, please
contact our local special service center.
f
Open the box and check air conditioner in area with good
ventilation (open the door and window) and without ignition source.
Note: Operators are required to wear anti-static devices.
lt is necessary to check by professional whether there is refrigerant
leakage befare opening tne box of outdoor machine; stop installing
the air conditioner if leakage is faund.
The fire prevention equipment and anti-static precautions shall be
prepared well befare checking.Then check the refrigerant pipeline to
see if there is any collision traces, and whether the outlook 1s good.
---�
Safety Principies for lnstalling Air Conditioner
Fire prevention device shall be prepared befare installation.
Keep installing site ventilated.(open the door and window)
lgnit1on source,smoking and calling is not allowed to exist in area
where R32 refrigerant rocated.
Anti-static precautions in necessary far installing air conditioner,
e.g. wear pure cotton clothes and gloves.
Keep leak detector in working state during the installation.
lf R32 refrigerant leakage occurs during tne installation, you shall
immediately detect the concentration in indoor environment until it
rea ches a safe level. lf refrigerant leakage affects the performance
of the air conditioner, please immediately stop the operation, and
the air conditioner must be vacuumed firstly and be returned to
the maintenance station far processing.
Keep electric appliance, power switch, plug, socket, high
temperature heat source and high static away from the area
underneath sidelines of the indoor unit.
The air conditioner shall be installed in an accessible location to
installation and maintenance, without obstacles that may block
air inlets or outlets of indoor/outdoor units, and shall keep away
from heat source inflammable ar exolosive conditions.
'-
www.infiniton.es
O lmportant Notices
Unpacking lnspection
©@
- 14 -
�--�

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Split-3726mfSplit-4626mfSplit-3910jmSplit-6226jm

Tabla de contenido