Maintenance And Cleaning - Steelcase Flex Personal Spaces Guia Del Usuario

MAINTENANCE AND CLEANING

LIFTING COLUMNS
• Regularly clean dust and dirt from lifting columns. To ensure all surfaces are
thoroughly cleaned, make sure the lifting columns are fully extended to their
maximum height.
• Be sure to inspect cables and lifting columns for damage.
• Check all connections for both correct function and secure mounting.
Note: A damp cloth is recommended. To protect the painted surfaces, use a
cleanser that is not highly alkaline or acidic. A pH-neutral product is ideal. Refer
to https://www.steelcase.com/cleaning-steelcase-products/
Note: Please do not move the desk without help. Refer to the guidelines at the
end of the assembly instructions, or contact your facilities group for assistance.
CONTROLLER
• Regularly clean the high touch point controller.
• To protect the desk operation, avoid moisture entering the controller, as it
could damage the printed circuit board (PCB) inside.
Cleaner should not contain bleach, chlorine or be highly alkaline or acidic.
Note:
Do not use hand sanitizer gel as a cleaning agent.
TROUBLESHOOTING
If you are having trouble with your desk, try the simple steps outlined below.
If problems persist, please refer to the Steelcase Flex Collection Height-Adjustable
Desk troubleshooting guide.
DESK WILL NOT FULLY ADJUST
• Check that the power cable is fully plugged into the outlet.
• Check that the power cable is fully plugged into the control box under the desk.
• Check that the desk is not overloaded. The weight load should be evenly
distributed.
• Synchronize the lifting columns as outlined on the next page.