General Description; Preparation For Use; Initial Checks; Instrument Power Supply - HT PV204 Manual Del Usuario

PV204
16
2
GENERAL
DESCRIPTION
The instrument is used to measure the sunlight irradiance. Possible applications
are the evaluation of the solar power in industrial installations (photovoltaic
plants) or its danger level for people's skin. The sunlight is usually expressed in
W/m or BTU/(ft *h).
2 2
The instrument performs the herewith measurements:
• Sunlight irradiance measurement up to 1999W/m
• Data HOLD function
• Measuring unit selection among W/m
• Manual scale
• Zeroing of the displayed value
• Maximum and Minimum values
• Low battery indication
• Backlight
• Auto Power OFF
3
PREPARATION
FOR USE
3.1

INITIAL CHECKS

Before shipping, the instrument has been checked from an electric as well
as mechanical point of view. All possible precautions have been taken so
that the instrument is delivered undamaged. However, we recommend
generally checking the instrument in order to detect possible damage
suffered during transport. In case anomalies are found, immediately contact
the forwarding agent. We also recommend checking that the packaging
contains all components indicated in § 7.4. In case of discrepancy, please
contact the Dealer. In case the instrument should be returned, please follow
the instructions given in § 8
3.2

INSTRUMENT POWER SUPPLY

The instrument is powered by a single 9V alkaline battery type IEC6F22
included in the package. To prevent battery discharge, it has not been
inserted in the instrument. For battery installation, follow the instructions
given in § 6.1. The " " symbol appears when the battery is flat. Replace the
battery by following the instructions given in § 6.1.
3.3
STORAGE
To guarantee precise measurement, after a long storage time under extreme
environmental conditions, wait for the instrument to come back to normal
condition (see § 7.3.1).
Rel. 2.00 - 05/09/22
/634BTU/(ft *h)
2 2
and BTU/(ft *h)
2 2