Unpacking; Setup Location Requirements; Electrical Connection - CASO DESIGN Chop & Go 1747 Manual Del Usuario

DE
EN
PLEASE NOTE

Examine the shipment to ensure the unit and manual are included and inspect the
FR
unit for any visible damage.

Immediately notify the carrier and/or the supplier about an incomplete shipment
IT
or any damage as a result of inadequate packaging or mishandling.
ES

3.3 Unpacking

NL
Carefully remove the packaging material and unit from the carton.
PT
PLEASE NOTE
SE

If possible, keep the original packaging for the duration of the guarantee period in
the event a return is necessary.

3.4 Setup location requirements

In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfi l the following prerequisites:
•
Place the device on a fi rm and even work surface.
•
Choose the setup location in such a way that children cannot reach the device.
•
Do not set up the device in a hot, wet or extremely damp environment or near fl am-
mable material:

3.5 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following instruc-
tions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage and frequen-
cy) on the rating plate with those of your electrical network. This data must agree in
order that no damages occur in the device:
24 CASO Chop & Go