Cleaning; Motor Unit; Accessories; Troubleshooting - CASO DESIGN Chop & Go 1747 Manual Del Usuario

DE

6.2 Cleaning

EN

6.2.1 Motor unit

FR
Do not immerse the motor unit in water or other liquids and do not put in the dishwasher.
IT
Wipe the outer surface of the motor unit with a soft, damp cloth.
ES

6.2.2 Accessories

NL
1. Fill approx. 400 ml of lukewarm water into the glass container and
add a drop of mild detergent.
PT
2.
Operate the appliance on level 1 for approx. 20 seconds.
3.
SE Remove the motor unit.
4. Separate the blade units from each other by turning blade unit A
counter-clockwise and detaching it from blade unit B.
5.
All accessories can be washed in warm water or the dishwasher.
Dry the parts well after rinsing.
PLEASE NOTE

Do not add more water or detergent as descrbied as the mixture may overfl ow.

7 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

7.1 Safety notices

ATTENTION

Repairs of electrical appliances must be carried out by qualifi ed person who are
trained by the manufacturer.

Repairs performed by untrained persons may result in considerable hazards for the
user and damage the machine.

7.2 Troubleshooting table

Problem
The device is not wor-
king after pressing a
button.
The device stops durings
use.
30 CASO Chop & Go
Cause
The device is not assembled
correctly.
The battery is empty.
The appliance has been
used for too long, or there is
too much food in it.
Solution
Check the assembling of the
device.
Charge the battery.
Let the appliance cool down
for at least 15 minutes, and
remove some of the food if
necessary.
A
B