4. Lock power cord plug onto the power
cord.
1. Lift up the clean water tank from the
side of the unit.
Clean
Water
Tank
2. Open the clean water tank cap. Fill the
tank with room temperature water to
the desired water fill line (for SMALL or
LARGE messes). For a small job, add
2 cap fills of cleaning formula to the
tank. For a large job, add 5 cap fills of
cleaning formula.
ASSEMBLY INSTRUCTIONS
Power
Cord
Plug
OPERATING INSTRUCTIONS
FILLING THE CLEAN WATER TANK
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly with
excessive stress on the cord may cause
cord damage. A damaged cord is an
electrical shock hazard and could cause
personal injury or damage.
Room Temperature Water
Small mess – bottom fill line
(0.2 gal liquid)
Large mess – top fill line
(0.6 gal liquid)
CAUTION
Do not fill with water above 104°F
(40°C).
- 9 -
Kenmore
Cleaning Formula
2 caps
5 caps
Large Mess
(0.6 gal liquid)
Small Mess
(0.2 gal liquid)