For optimal use of your boat, please consult your dealer.
The engine bolts must be fitted through the transom using a screw hole sealing procedure (e.g.:
using Sikaflex sealant).
When installing the engine on the Medline 500 and 540, it is at the dealer's discretion
to produce and fit the steering cable outlet cable grommet. In order to do that, the
WARNING
engine must be secured then the hole for the steering cables drilled in the deck,
aligning with the engine steering bar.
HOW TO DRIVE YOUR BOAT
IV - HOW TO DRIVE YOUR BOAT
Before starting, refer to the Manual - Volume 1.
Page 25 / 59
E
N
G
L
I
S
H