Integra MAYFIELD A2600R Manual De Instrucciones página 14

EN – ENGLISH
Attachment to the Spine Table
IMPORTANT TIPS:
• As you are attaching the Spine Table Adaptor to the spine table, it is recommended that you
close the lever of the Base Handle and tighten the swivel adaptor to allow you to better control
the Adaptor assembly as you maneuver it onto the parallel rails of the table.
• This Adaptor should be placed on the head-end of the spine table. It is helpful to be standing
on the left hand side of the spine table for attachment.
Follow these steps:
1. Open up the jaws completely on both of the Adaptor uprights with the lock knob.
Figure 7 Opening Adaptor Upright Jaws
14