Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN – ENGLISH
Inspection of Components (Continued)
4. Perform visual check of all components (Start at one side of the adaptor and
systematically review each component as you make your way to the other side to assure that
you do not miss a component).
a. Check all connections to be free of debris that might impair the function of that
component or the one that connects to that component.
b. Examine all components for cracks on all surfaces.
c. Check that the Shock Cushion is present and in proper position on the Locking Handle
assembly. Cushion should not be protruding outside the handle slot.
d. Slide the base handle from side to side on the crossbar to make certain that the surface is
smooth and free of debris or anything that would impede its movement.
Shock Cushion
Figure 10 Shock Cushion Location
20
Publicidad
Tabla de contenido
