GE PTS9200 Instrucciones De Instalación página 10

Installation Instructions
11 REPLACING THE LOWER OVEN DOOR
NOTE: The oven door is heavy. You may need help
lifting the door high enough to slide it into the hinge
slots. Do not lift the door by the handle.
A. Lift the oven door by grasping each side.
B. With the door at the same angle as the removal
position (approximately 1"–2" [2.5 cm–5.1 cm] from
the closed position), seat the notch of the hinge arm
into the bottom edge of the hinge slot. The notch of
the hinge arm must be fully seated into the bottom
of the slot.
C. Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge
of the slot.
D. P ush the hinge locks up against the front frame of the
oven cavity, to the locked position.
E. Replace hinge bracket, if equipped, to ensure proper
door functionality.
F. Close the oven door.
10
Notch of Hinge
Securely Fitted
Into Bottom of
Bottom
Hinge
Edge of
Arm
Slot
Hinge Notch
Hinge in
Locked
Position
Hinge Slot
Hinge Bracket
31-2000374 Rev. 1