GE PTS9200 Instrucciones De Instalación página 3

Installation Instructions
2 A CUTOUT FOR TWIN FLEX WALL OVEN IN WALL CABINET
NOTE: If the cabinet does not have a front frame and the sides are less than ¾" (1.9 cm) thick, shim both sides
equally to establish the cutout width.
These ovens are
not approved for
installations that
stack one single
wall oven above
another single
wall oven.
E
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
30.5"
(77.5 cm)
Cutout – observe all
dimensions and
requirements.
Dimension
A
B
C
D
E Clearance to Adjacent Corners,Drawers, Walls, etc.,
F
G
H
* R efers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
31-2000374 Rev. 1
Opening Between
Inside Walls
Must be at Least
28-1/2" (72.4 cm)
Wide
Center Line
Cutout – observe all
dimensions and
requirements.
2" (5.1 cm) Min.
Dimension Description
Cabinet Width
Cutout Width
Cutout Height
Clearance from cutout - side edges*
When Door Is Open
Clearance from cutout - top*
Clearance from cutout - bottom*
Junction Box Location
H
Junction Box
Location (junction
box may be located
in adjacent cabinet)
22" (55.9 cm)
Min. to Bottom of
Junction Box
Cutout Depth
23-1/2"
(59.7 cm) Min.
B
F
D
G
Recommended Cutout
Location from Floor
26 ½" (67.3 cm) max.
A
30" Twin Flex Wall Oven
30" (76.2 cm)
28 1/2" (72.4 cm) min.
28 5/8" (72.7 cm) max.
27 1/4" (69.2 cm) min
27 5/16" (69.4 cm) max.
11/16" (1.75 cm)
15" (38.1 cm) min.
1" (2.5 cm) min.
1 1/4" (3.2 cm)
9 1/2" (24.1 cm) max. right side only
C
3