Kärcher SCW 2.4/25G Guía De Operación página 2

On Your Apron as Karcher North America
Vendor Website: http://hdtr.karcher.com
OPERATING INSTRUCTIONS
STEP 6: Slide the fuel valve lever to the "ON"
position. When the engine is not in use, leave the
fuel valve in the "OFF" position.
STEP 8: Turn the
engine switch to "On"
position.
Tool Tips & Safety Guide SCW 2.4/25 G (Jarvis)
Operation and Safety Guide
STEP 9: Pull the starter grip. If the engine
fails to start after 2 pulls, squeeze the
trigger gun to release pressure and repeat
step. Return starter cord gently. After the
engine warms up enough to run smoothly,
move choke to run position and throttle to
fast position.
CAUTION: Small engines may kick
back. Do not hold pull starter grip
tightly in hand.
High Pressure Surface Cleaner
Model # SCW 2.4/25G (Jarvis)
Support Phone No. 800-821-6490
STEP 7: Move the choke lever to the "Choke"
position (on a warm engine, leave the choke
lever in the run position).
WARNING! Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
8.644-855.0 - A 03/05/21
Page 2 of 3