Acqua Brevetti BRAVO FT300 BRAVO FT302 Instrucciones De Instalacion Y Uso página 30

Installation 1.
Water inlet at left side
Water outlet at left side
Periodically it is necessary to clean the filter by opening the bottom drain valve. The Manufacturer
declines all responsibility for damage to things and / or people deriving from non-compliance with
the suggested schemes
Warning! The drain pipe of the washing water filter must not be fixed directly to the filter.
The filter drain must be placed at a minimum distance of 20 mm from the drain.The
minimum diameter of the discharge pipe must be 40 mm and the inclined section of the pipe, before
the siphon, must be at least 1 m long.
Alternatively, a bucket can be placed under the filter discharge at a minimum distance of 20 mm.
Any other configuration could result in the filter not working correctly.
For any doubt contact
e-mail to servizi@acquabrevetti.it
MAN162 – REV.0
Bravo – BravoDUE – BravoCALOR – ENGLISH
Installation 2.
Water inlet from bottom
Water outlet from above
Acqua Brevetti
).
Installation 3.
Water inlet at right side
Water outlet at left side
SRL (Tel.: +39.049.8973432
Installation 4.
Water inlet from above
Water outlet from bottom
or send
PAG. EN-12
an