RECOMMENDATIONS
DANGER
WARNING
DANGER
WARNING
INSTALLATION AND CIRCUIT – Fuel
IN THE EVENT OF A PETROL LEAK OR A FIRE, THE PETROL
CIRCUIT CLOSING VALVE LOCATED ON THE TANK ENABLES
THE TANK TO BE CUT OFF FROM THE PETROL CIRCUIT AND
MUST REMAIN CLOSED.
HAVING A FULL TANK AVOIDS CONDENSATION APPEARING
ON EACH OUTLET.
GET THE TANK CLEANED EVERY FIVE YEARS.
CHECK THE TIGHTENING OF THE CLAMPS ON ALL HOSES.
WHEN YOU DRAIN THE FILTER, DO NOT EMPTY THE WATER
INTO THE BOAT. USE A RECOVERY TRAY UNDER THE FILTER.
CUT THE POWER SUPPLY BEFORE DISMANTLING THE FILTER
CARTRIDGE.
CAREFULLY READ THE INFORMATION ON THE FILTER'S
INSTRUCTIONS.
PETROL IS EXTREMELY INFLAMMABLE. MAKE SURE THAT
ENGINES ARE TURNED OFF BEFORE WORKING ON THE FUEL
SYSTEM.
DO NOT SMOKE; KEEP ALL NAKED FLAMES OR INCANDESCENT
BODIES WELL AWAY FROM THE WORK AREA.
NEVER DRILL THE TANK AREA WITH A DRILL BIT
PROTRUDING MORE THAN 30 MM FROM THE DRILL HEAD
(MARK ON THE DECK BY A HATCH) AND DO NOT USE SCREWS
OVER 30 MM LONG.
Page 28/ 52