Iv -6-Bilge Pump Operation - Zodiac YACHTLINE 360 Manual De Instrucciones

INSTALLATION AND CIRCUIT – CONNECTION of
IV -5-4-Connecting accessories on the console:
Depending on the level of equipment of your tender, Zodiac recommends placing it in the
following manner (see templates supplied with the boats) which optimises the space available.

IV -6-BILGE PUMP OPERATION

The bilge pump is not wired to the battery switch and operates independently; the control switch
is always ON.
 Automatic operation (set position): in this position, the bilge pump operates automatically.
The indicator light is on.
 Off: in this position (set position), the bilge pump is off. The indicator light is off.
 Forced operation: the switch has to be held depressed to operate it. As soon as you release
the switch, it returns to the Stop position (2).
WARNING
NOTE
options
At anchor, set the bilge pump switch to the automatic position.
Zodiac recommends the use of a tarpaulin or mooring cover in order
to prevent water ingress in the event of rain.
Page 29 / 31
E
N
G
L
I
S
H