General Power Tool Safety Warnings - Parkside PAT 20-Li A1 Traducción Del Manual De Instrucciones Original

Charger PLG 20 A1*
INPUT
Rated voltage
Rated power consumption 65 W
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
Wire staples
Staple width
Type 55
Staple length
15–25 mm
Type 47
15, 20, 25,
Nail length
32 mm
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise emission value
Noise measurement value determined in accord­
ance with EN 60745 . The A­rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Total vibration value
Vibration values determined in accordance with
EN 60745:
Vibration emission value
Uncertainty
PAT 20-Li A1
230–240 V ∼, 50 Hz
(AC)
3 .15 A T3.15A
21 .5 V (DC)
2 .4 A
approx . 60 min
II / (double insulation)
6 mm
15–25 mm
15, 20, 25, 32 mm
L = 84 .1 dB (A)
pA
K = 3 dB
pA
L = 95 .1 dB (A)
WA
K = 3 dB
WA
a = 3 .65 m/s
2
h,W
K = 1 .5 m/s
2
NOTE
► The vibration emission value specified in
these instructions has been measured in
accordance with a standardised measuring
procedure and can be used to make equip­
ment comparisons . The specified vibration
emission value can also be used to make an
initial exposure estimate .
WARNING!
► The vibration emission value varies in accord­
ance with the use of the power tool and may
be higher than the value specified in these
instructions in some cases . Regular use of the
power tool in such a way may cause the user
to underestimate the vibration . Try to keep the
vibration loads as low as possible . Examples
of measures for reducing the vibration load
are wearing gloves when using the tool and
limiting the working time . Wherein all states
of operation must be included (e .g . times
when the power tool is switched off and times
where the power tool is switched on but
running without load) .
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains­operated (corded) power tool or battery­
operated (cordless) power tool .
GB │ MT │ 31 ■