Power Tools - Maxvac DV20-MB Instrucciones De Uso Y Mantenimiento

'SELF CLEANING FILTER' FUNCTION
With switch (B) in position "I", when
switch (A) is set to the "AUTOMATIC"
position the Self Cleaning filter function
is activated.
When the appliance is switched off, it
will continue to run for 8/10 seconds,
then the self-cleaning filter function will
begin.
When the switch 'A' is set
to MANUAL the Self Cleaning
Filter function is not active.
'SELF CLEANING FILTER'
MANUAL
Warning light (C) on:
manually start the "Self-cleaning filter"
function; press the orange switch (E).
For proper cleaning of the filter element,
follow the instructions on page 26
Continuous operation of the "Self-cleaning filter" system for more than 60
seconds may cause the thermal protection switch to trip.
If the air speed drops to below 20 m/sec., the warning light comes
on (in accordance with IEC/EN 60335-2-69)
20 DV 20 | 35 | 50 MB
C
B
A
ON
OFF
MAX-VAC.COM

POWER TOOLS

FOR USE WITH POWER
TOOL
Selector switch (A): in "AUTOMATIC"
position.
Power switch (B): position "I" -
Appliance on.
The appliance runs in sync with the
power tool.
DV 20 | 35 | 50 MB
C
B
A
MAX-VAC.COM 21