Work Environment; Tools; Date Code; Type Identification - Stanley EZM1000 Manual De Instrucciones Y Servicio

E N G L I S H

2.3 WORK ENVIRONMENT

• Keep the work environment clean and neat.
• Use dry, fi ltered and with anti-corrosive oil lubricated air. If not
available, put 0.1 ml (approximately 5 drops) of anti-corrosive
lubricating oil in air connection of tool three times each operating
day.
• Work in a frost-free environment.
• The connection to the tools is G
A connection nipple has not been included.
Provide an appropriate solution yourself.
Set a constant air pressure to 5 - 7 bars (maximum 7 bars).

2.4 TOOLS

Never use the tools
- when the nose piece/front sleeve (A) is missing;
- when the mandrel collector (B) has not been positioned
• Check the tools for damage before connecting the air pressure.
• Keep the tools in an optimum condition.
• Switch off the closing valve (C) when the tools are not used.
• Make sure that the fl exible connection hose (D) is not pressurised
when disconnecting.
• Do not modify the tools in any way.
• Only use the device for appropriate purposes.

2.5 DATE CODE

This is the place of the Date Code (A) of the tools.

2.6 TYPE IDENTIFICATION

This is the place of the type identifi cation (B) of the tools.
6
1
/ ".
4
O R I G I N A L I N S T R U C T I O N