cecotec BOLERO DRESSCODE 6000 Manual De Instrucciones página 61

Child lock
- Hold down buttons (2) and (3) for 3 seconds, the device will beep indicating the Child lock
function is activated. This function is designed to prevent children from misusing the
appliance.
- When the child lock is activated and a programme starts, the child lock indicator will switch
on, and the KL and remaining time on the display are alternately displayed.
- Every time a button is pressed, the child lock indicator will flash for 3 seconds.
- When a programme finishes, END and the child lock indicator will be displayed for 10
seconds alternately. Then, the child lock light will flash for 3 seconds.
- To cancel the child lock function, hold down both buttons for 3 seconds again.
- The child lock will disable all the buttons except for the on/off button and the Child Lock
button.
- Deactivate the Child lock function before selecting a programme and starting washing.
Silent
Select this programme to mute the washing machine. Hold down button 1 for 3 seconds, this
setting will remain active until it is restarted. To activate the sound again, hold down the same
button for 3 seconds.
Display settings Fig. 24
These options will light up when selected for a washing cycle.
- Delay start (1)
- Extra rinse (2)
- Spin speed (3)
- Running cycle (4)
- Locked door (5)
- Child lock system (6)
- Remaining time and speed (7)
Speed
Bolero DressCode 6000 1000 rpm: 0-400-600-800-1000
Bolero DressCode 7000 / Bolero DressCode 8000 1400 rpm: 0-400-600-800-1000-1200-1400
Programme
Cotton 30°C
Cotton 40°C
Cotton 60°C
Default speed
(rpm)
1000 1400
100 1400
800 1400
800 1400
Programme
Spin Only
Drain Only
Rinse & Spin
DRESSCODE 6000/7000/8000
ENGLISH
Default speed (rpm)
1000 1400
1000 1400
- -
1000 1400
61