Safety Instructions - cecotec BOLERO DRESSCODE 6000 Manual De Instrucciones

SAFETY INSTRUCTIONS

- Read these instructions thoroughly before using the
appliance. Keep this instruction manual for future reference
or new users.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
- If the supply cord is damaged, it must be replaced by the
Technical Support Service of Cecotec or by a similarly
qualified person in order to avoid a hazard.
- This appliance is for indoor use only.
- Make sure the device is installed in places where the
temperature is above 0ºC.
- The device is not designed for built-in installation.
- The new hoses set supplied with the appliance are to be
used, do not reuse old hoses.
- Before carrying out any maintenance in the device, unplug
the appliance from the mains.
- As a safety measure, we advise you to unplug the device and
cut the water supply after every use. Maximum water inlet
pressure: 1 MPa. Minimum water inlet pressure: 0.05 MPa.
- Never pull out the power plug with your hands wet.
- Unplug the power cord before cleaning or repairing the
product.
- For safety reasons, the appliance must be properly earthed.
- Water channelling and electrical devices must be connected
by a qualified technician in accordance with the local and
national safety regulations by the manufacturer.
- The glass door may reach high temperatures during
operation. Keep children and pets away from the machine
during the operation.
8