cecotec BOLERO DRESSCODE 7200 INVERTER Manual De Instrucciones página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
ENGLISH
Favourites programme
-
Use this option to save the most used programmes.
-
Once you have selected the programme and set the desired options, hold down the button
(3) for 3 seconds before starting the washing. The default programme is Cotton.
Temperature (2)
Press this button to select the desired temperature (Cold, 20ºC, 30ºC, 40ºC, 60ºC, 70ºC, 90ºC).
Speed (3)
-
Press this button to select the desired speed.
-
Bolero DressCode 7200 Inverter / Bolero DressCode 7200 Inverter Steel / Bolero DressCode
8200 Inverter / Bolero DressCode 8200 Inverter Steel / Bolero DressCode 9200 Inverter /
Bolero DressCode 9200 Inverter Steel rpm: 0-400-800-1200-1400 rpm.
-
Bolero DressCode 10200 Inverter / Bolero DressCode 10200 Inverter Steel rpm 0-400-
600-800-1000-1200-1400-1500
Function (4)
Use this button to select the desired option: Prewash or Extra rinse.
Child lock
-
Hold down buttons (2) and (3) for 3 seconds, the device will beep indicating the Child lock
function is activated. This function is designed to prevent children from misusing the
appliance.
-
When the child lock is activated and a programme starts, the child lock indicator will switch
on, and the KL and remaining time on the display are alternately displayed.
-
Every time a button is pressed, the child lock indicator will flash for 3 seconds.
-
When a programme finishes, END and the child lock indicator will be displayed for 10
seconds alternately. Then, the child lock light will flash for 3 seconds.
-
To cancel the child lock function, hold down both buttons for 3 seconds again.
-
The child lock will disable all the buttons except for the on/off button and the Child Lock
button.
-
Deactivate the Child lock function before selecting a programme and starting washing.
Display settings
Fig. 24
-
These options will appear illuminated when they have been programmed for the washing.
Pre-wash 1
-
The Pre-wash function is used to perform an extra-wash before the main wash cycle. It is
suitable for washing the dust on the surface of the clothes.
-
Pour detergent in "case I) before selecting this function.
62
Extra rinse 2
The laundry will undergo extra rinse once you select it.
Programme
Default speed (rpm)
1400
1500
Synthetics
1200
1200
Mix
1000
1000
Rapid 45'
800
800
Express 15'
800
800
Wool
800
800
Sterilization
800
800
Rinse & Spin
1000
1000
Washing programmes
There are different programmes suitable for different types of laundry:
Synthetics
-
Wash synthetic articles, for example shirts, coats, mix.
-
While washing the knitting textiles, detergent quantity shall be reduced due to its loose
string construction and easily-forming bubbles. Hard-wearing and heat-resistant textiles
made of cotton or linen.
Mix
Cotton and synthetics clothes.
Rapid 45'
This programme is suitable for washing not very dirty clothes. Saves energy and water.
Express 15'
Extra-short programme, suitable for lightly soiled washing or for small amounts of laundry.
Wool
Hand or machine-washable wool or rich-wool textiles. Gentle washing programme to prevent
shrinkage, longer programme pauses (textiles soaking).
ENGLISH
Programme
Default speed (rpm)
1400
1500
Cotton
1400
1500
Sport
800
800
20ºC
800
800
60´ Wash
1000
1000
ECO 40-60
1400
1500
Intensive
800
800
Delicate
800
800
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER
DRESSCODE 7200 / 8200 / 9200 / 10200 INVERTER STEEL
63

Publicidad

Tabla de contenido
loading

Tabla de contenido