3. TOUCH-USB
To control the display of a computer from the machine, use the supplied USB cable to connect the machine to
the computer.
4. PUBLIC-USB3.0 (USB 3.0 Type-A)
Connects the machine to the external device so that they can communicate
Back Side
This section uses RICOH Interactive Whiteboard A6500 as an example.
HDMI-OUT
MIC
13
12
1. LAN (Ethernet interface)
Connects the Ethernet cable to connect the machine to the network
Connect either one of the Ethernet interfaces to the network
If you connect an external device to the other Ethernet interface, you can connect the external device to the
network through this machine.
It is not possible to connect to two different networks.
2. TOUCH-USB
To control the display of a computer from the machine, use the supplied USB cable to connect the machine to
the computer.
AUDIO-OUT
SPDIF
AUDIO-IN
VGA
11
10
9
8
Component Names and Functions
RS232
7
1
2
3
4
5
6
Y313IX0004
39