Hart VJC507PF-C-3701 Manual Del Operador página 11

OPERATION
• Verify that the power cord is disconnected from
the outlet.
• Make sure the collection tank is empty before
using as a blower. Clear all dirt and debris from
the hose and collection tank.
• Remove the hose from the vacuum port.
• Insert the locking end of the hose into the blower
port on the back side of the power head and
lock into position.
• Push the required attachment onto the free end
of the hose or extension wand.
• Verify that the power switch is in the 'O' OFF
position before plugging the power cord into
the outlet. Plug the power cord into the outlet.
• Before turning on the vacuum, firmly hold the
loose end of the hose. Turn the motor on by
flipping the switch to the 'I' ON position.
• Once you have completed blowing, flip the
power switch to the 'O' OFF position and unplug
the power cord from the outlet.
FIG. 30
FIG. 31
FIG. 32
FIG. 33
FIG. 34
FIG. 35
FIG. 36
11 English