Installing Attachments - Hart VJC507PF-C-3701 Manual Del Operador

ASSEMBLY
INSTALLING THE DUST COLLECTION BAG
See Figure 10.
• Optional: For improved dust filtration, fit the dust
bag flange onto the inlet port, taking care not to
damage the bag.
INSTALLING THE FOAM WET FILTER
See Figure 11.
• For wet vacuum cleaning, remove the cartridge
filter, and install the supplied foam wet filter.
See page 14 for the foam wet filter installation
instructions.
ATTACHING THE POWER HEAD
See Figure 12.
• Place the power head back on the collection
tank aligning the top section with the latches,
and snap into place.
FIG. 10
FIG. 11
FIG. 12
ATTACHING THE HOSE
See Figure 13.
• Insert the locking end of the hose into the

INSTALLING ATTACHMENTS

See Figure 14.
• Choose the desired attachment and insert onto
POLARIZED PLUG
To reduce the risk of electrical shock, this
appliance has a polarized plug (one blade wider
than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. Do not change the plug in any way. Double
insulation
wire grounded power cord and grounded power
supply system.
DUST
BAG
FOAM WET
FILTER
POWER HEAD
7 English
vacuum port of the collection tank and turn
clockwise to lock into place.
the end of the hose or extension wand.
eliminates the need for the three
FIG. 13
HOSE
FIG. 14