Hart VJC507PF-C-3701 Manual Del Operador página 15

TROUBLESHOOTING
WARNING:
To reduce the risk of electric shock, unplug before troubleshooting.
PROBLEM
No power supply.
Faulty power cord.
The wet/dry
vacuum will
not operate.
Collection tank is full.
Switch in the wrong position.
The cartridge filter is missing or
damaged.
The dust
comes out
Vacuum has been used to collect fine
from the motor
dust, such as dry wall dust, fireplace
cover.
soot, or ash, without a fine dust filter.
There are blockages in the nozzle,
Reduced
hose, or the collection tank inlets.
efficiency and
motor/speed
The cartridge filter is clogged by fine
vibration.
dust.
WARRANTY
We take pride in producing a high quality, durable product. This HART
(3) year warranty against defects in workmanship and materials from date of purchase under normal
household use. If product is to be used for commercial, industrial, or rental use, a 90 day limited warranty
will apply. Please keep your receipt as proof of purchase. This warranty gives you specific legal rights,
and you may have other rights, which vary from state to state. For product service call Customer Service
at 1-866-384-8432.
Not Covered by Warranty:
• Any part that has become inoperative due to misuse, negligence, direct/indirect abuse, accidents,
improper maintenance, repairs, or alterations;
• Consumables such as filters and accessories;
• Normal wear and tear of parts and attachments, such as hose, nozzles, or casters;
• Normal deterioration of the exterior finish due to use or exposure;
• Any product where serial number/data label is tampered with or removed;
• Any product purchased from an unauthorized retailer.
POSSIBLE CAUSE
15 English
SOLUTION
Check the power supply, cord, breakers, and
fuses.
Unplug and check the power cord. If
damaged, have it repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the power head.
Attach or replace the cartridge filter.
Remove the standard cartridge filter and install
the appropriate fine dust filter (available
separately).
Unplug and check nozzle, hose, and collection
tank inlets for blockages.
Take off the filter and clean it or install a new
cartridge filter.
product carries a limited three
TM