Battery Charging - Jeep Adventurer Manual Del Usuario

CAUTION
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.
Instructions
1. Open the kickstand
2. Switch off the scooter
Model Reference picture
Adventurer
Urban Camou
Sentinel
CAUTION
Model
Adventurer
Urban Camou
Sentinel
Using another type of charger may damage the scooter or entail other potential risks. Never leave the item unsupervised
while it is charging. Do not switch the product on while it is charging.

4. Battery charging

To recharge the item, use the battery charger supplied ONLY
Battery charger model
HVE063-4200150
HVE126-5460200
XHK-916-42015
Instructions
- Remove the rubber cover from the charging
socket.
- Connect the battery charger to the electrical
outlet and then to the charging socket.
- When the item is fully charged, the light on
the charger changes from red (charging) to
green (charging complete).
- After recharging, disconnect the battery
charger from the vehicle and reinsert the
rupper cover.
- Unplug the battery charger from the power
socket.
Do not switch the scooter on while it is
charging.
CAUTION
The red light on the charger will turn green
when charging is complete.
Output voltage
42V – 1.5A
54.6V – 2.0A
42V – 1.5A
11
Charging time
7 h
5 h
5 h