Quick Guide - Jeep Adventurer Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared
kms, or the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this
case, restore pressure as indicated.
Check and adjust the brakes.
Turn on the display.
• Place the item on a flat surface.
• Hold the handlebar firmly using both hands. Step onto the footrest with one foot and use the other to give yourself a
gentle push and accelerate.
CAUTION
Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
When riding the item, tilt body in the riding direction during a turn and slowly turn the handlebars.
To stop the item, release the throttle, pull the brake lever
• To get off, first stop the item completely. Getting off the moving item can cause injury.
Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel
wear, throttle and charge status of battery.
Brake lever adjustment
Adventurer / Urban Camou
Sentinel

6. Quick guide

Indications
It is possible to adjust the position of the
brake lever, if necessary, by unscrewing
the screw (A). Once the position has been
adjusted, tighten the screw (A).
Indications
It is possible to adjust the position of the
brake lever, if necessary, by unscrewing
the screw (A). Once the position has been
adjusted, tighten the screw (A).
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Urban camouSentinel

Tabla de contenido