Range And Performance; Storage, Maintenance And Cleaning - Jeep Adventurer Manual Del Usuario

8. Range and performance

The maximum range and performance of the vehicle depends on a number of variables:
Terrain: riding on smooth roads provides greater range and performance than riding on rough roads and climbs.
Weight of user: the greater the weight, the lower the range and performance of the vehicle.
Temperature: riding the scooter in very cold or hot conditions affects range and performance.
Speed and riding style: riding smoothly and at a constant speed extends the range. Continuous acceleration, deceleration
and manoeuvring greatly reduce the range. A lower speed extends the range.
Maintenance: prompt recharging, proper maintenance and regular checking of tyre pressure increase range and ensures
consistent performance over time.
The level of battery charge affects performance – the lower the level, the lower the speed, especially on climbs.

9. Storage, maintenance and cleaning

CAUTION
If there are stains on the body of the scooter, wipe with a damp cloth. If the stains persist, apply neutral soap, brush out
with a toothbrush, then wipe with a damp cloth. If there are scratches on the plastic components, use sandpaper or other
abrasive material to remove them. Do not clean the items with alcohol, petrol, paraffin or other corrosive or volatile chemical
solvents to prevent severe damage. Do not wash the item using high-pressure water jets. When cleaning the scooter, make
sure that it is switched off, that the charging cable is disconnected, and the rubber cap is closed, as a water leak may cause
an electric shock or other serious problems. Water seeping into the battery may cause damage to internal circuits and risk
of fire or explosion. Should you suspect that water may have entered the battery, stop using the battery immediately and
return it to your dealer's after-sales service for checking.
When the item is not in use, store it indoors in a cool, dry place. Do not store outdoors or inside cars for extended periods of
time. Excessive sunlight, overheating, and excessive cold accelerate tyre ageing and jeopardize the life of both the item and
the battery. Do not expose it to rain or water or immerse it in water to wash it.
Regularly check the tightness of the bolted parts, in particular wheel axles, the folding and transportation system, the
steering system, the braking system, the state of the frame, the forks and the suspension. Nuts and all other self-locking
fasteners may lose their effectiveness. Periodically check and tighten these components.
Like all mechanical components, the item is subject to wear and tear. Different materials and components may react to wear
or stress fatigue in a variety of ways. If the service life of a component is exceeded, it may break suddenly, resulting in injury
to the rider. Any cracks, scratches or changes in colour in areas subject to high levels of stress indicate that the life of the
component has been reached and must be replaced.
Check the condition of the tyres: there must be no cuts, cracks, foreign bodies, abnormal swelling, missing parts or other
damage.
Do not attempt to disassemble or repair the scooter yourself. Replacement of all scooter components should be carried out
by the technical service department. For further information, contact your dealer or visit www.jeepurbanemobility.com
17