HYVA FE ALPHA Manual Del Usuario página 5

Hyva Hydraulics Recommendation
General recommendation on hydraulics
Please be aware of the following issues in case you connect the cylinder to a truck with hydraulics sourced from a
rd
3 party.
• Caution: Check the maximum working pressure of the tipping valve in relation to the working pressure of the
Hyva cylinder. Under pressure will lead to reduced tipping capacity. Over pressure can lead to serious damage
to the cylinder and even personal injury. For cylinders damaged due to applying a faulty hydraulic kit our
warranty conditions do not apply.
• Make sure the net oil volume of the tank and the oil level are sufficient. Insufficient oil can lead to a damaged
pump and to dangerous situations.
• Make sure the installation runs on clean oil by fitting a filter and replacing the oil at regular intervals.
• The pump flow is important for the tipping speed. Make sure the pump fits the requirements of the cylinder.
• Please contact Hyva for further advice.
Safe tipping
Make sure that you apply the supplied safety stickers on the truck. The safety stickers warn both the driver and
people in the neighborhood of the tipper.
OH-E CYL-0031 / 08-07-2015 / RV AA 5
GB