Ultrasonic Sensors; Compass; Installing Iaqualink; Download The App - Polaris VTRX25iQ Manual Del Propietário

Ultrasonic Sensors

(Sensor Nav System
TM
VTRX30iQ)
The Ultrasonic Sensors are an Enhanced Sensor
Navigation System which provides wall detection
for smart and efficient cleaning. Ultrasonic Sensors
allow the cleaner to stop before hitting the wall and
based on the cleaning pattern chosen the Vortrax
will either turn or climb to clean the wall or tile line.
Sensors evaluate:
• Depth
• Acceleration
• Temperature
• Orientation
Sensors
Figure 8. Ultrasonic Sensors on Front of Cleaner

Compass

The compass counts the turns during the cycle in
order to perform a final untangling rotation pattern
corresponding to the counted number of turns
during the cycle.
only available for
5
Installing
iAquaLink
The iAquaLink app is available for download from
the App Store or Google Play.
With iAquaLink Control, you can connect to your
robotic cleaner from anywhere, anytime to access
many functions and troubleshooting advice.
App features are dependant on model.
Before you begin installation, make sure
you have the following:
• Robotic Cleaner submerged in the pool
• Control Box connected and plugged into a
GFCI outlet
• Smart device (phone or tablet) with Wi-Fi and
Bluetooth enabled
• Wi-Fi router with sufficient signal strength at the
Control Box
IMPORTANT: Have your Wi-Fi network password
•
available

Download the App

Install or update the iAquaLink app from the
App Store or Google Play.
Once the download is complete, select the
iAquaLink icon on your smart device to open
the app.
Page 11
®