Technical Data; Noise/Vibration Information - Bosch Professional GDR 12V-110 Manual Original

a)
(14) Universal bit holder
a)
(15) Screwdriver bit
(16) Application tool (e.g. impact socket)
a)
(17) Belt clip

Technical Data

Cordless Impact Wrench
Article number
Rated voltage
A)
No-load speed
– Setting 1
– Setting 2
A)
Impact rate
– Setting 1
– Setting 2
A)
Max. torque
Machine screw diameter
Max. screw diameter
Tool holder
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
C)
tion and during storage
Recommended rechargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 12V 2.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C

Noise/vibration information

Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
Impact tightening of fasteners of the maximum capacity of
2
the tool: a = 10.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
Bosch Power Tools
(18) Coloured clip
a) Accessories shown or described are not included with the
a)
V=
-1
min
-1
min
-1
min
-1
min
Nm
mm
mm
kg
°C
°C
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
2
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
GDR 12V-110
3 601 JE0 0..
12
0–1200
0–2600
0–2700
0–3100
110
M4–M12
8
¼" internal hexagon
0.92–1.2
0 to +35
–20 to +50
GBA 12V...
GAL 12...
GAX 18...
1 609 92A 7X1 | (15.07.2022)
English | 15
GDS 12V-115
3 601 JE0 1..
12
0–1200
0–2600
0–2700
0–3100
115
M4–M12
8
∎ 3/8"
0.91–1.2
0 to +35
–20 to +50
GBA 12V...
GAL 12...
GAX 18...