Proper Use; Technical Data - EINHELL GC-EC 7520 T Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
Electric Pole-Operated Pruner
Chain wheel cover
Saw chain
Cutter bar
Cutter guard
Shoulder strap
Original operating instructions
Safety instructions

3. Proper use

The electric pole pruner is designed for cutting off
branches from trees. It is not suitable for extensi-
ve sawing work, cutting down trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: ......................... 230-240 V ~ 50 Hz
Power rating: .............................................. 750 W
Cutter bar length: .................................... 200 mm
Max. cutting length: ................................. 180 mm
Chain pitch: .................................. 3/8", 9.525 mm
Chain thickness:.......................... (0,043") 1.1 mm
Sprocket wheel: ................................ 6 teeth, 3/8"
Cutting speed at rated rpm (vu): .................11 m/s
Oil tank capacity: ..................................... 100 cm³
Weight excluding accessories: ...................3.6 kg
Chain: ................................. Kangxin ALP-43-33S
Cutter bar: ...................... Kangxin AM08-33-437P
Protection class:............................................. II/
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN ISO 11680-1.
Anl_GC_EC_7520_T_SPK13.indb 20
Anl_GC_EC_7520_T_SPK13.indb 20
GB
L
sound pressure level ..................... 81.8 dB(A)
pA
K
uncertainty ............................................. 3 dB
pA
L
sound power level ........................ 97.7 dB(A)
WA
K
uncertainty ........................................ 2.42 dB
WA
L
sound power level guaranteed ....... 100 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN ISO
11680-1.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Take appropriate measures to protect yourself
against vibration stress. Take the entire work
sequence into consideration including times at
which the device is not working under load or
is switched off . Appropriate measures include
among other things regular care and maintenance
of the device and tool attachments, keeping your
hands warm, taking regular breaks and good
work sequence planning.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
- 20 -
< 2.5 m/s
2
h
2
27.04.2022 09:34:34
27.04.2022 09:34:34

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

45.012.40

Tabla de contenido