CORRECT FITTING
Make sure that the helmet fits correctly as shown below, the helmet must NOT be too low or
high on the head because it will interfere with your line of sight. Eyes should be central to the
eye aperture. Please note that the visor found in our off-road helmets is adjustable. Try the off-
road helmet with the visor in all positions prior to purchase in order to satisfy yourself that the
helmet meets your requirements. SCOTT Sports SA shall not be liable for any damages and
losses due to incorrect fitting.
• IV. CARE AND CLEANING
Clean your helmet with a soft cloth or sponge, warm water, and mild soap.
WARNING !
Helmets are made of material that can be damaged by many traditional cleaning agents. Sol-
vents or cleaning agents with a petroleum base are particularly dangerous. These can damage
the helmet to such an extent that its protective ability is significantly compromised. Damage is
often not noticeable. SCOTT Sports is not liable for any damages caused by improper cleaning.
• V. TRANSPORTATION & STORAGE
When transporting or storing keep your helmet in the soft bag supplied in the retail box. Let
your helmet air dry after each use and then store it in a cool dry place. Excessive heat can
damage your helmet. In direct sunlight, dark equipment cases or trunks of automobiles can
become so hot as to cause heat damage. Heat damaged helmets are recognizable by uneven
or blistered surfaces.
• VI. SALES & HOMOLOGATION
Our experts for development, distribution, and marketing in the European Union and world-
wide are located at: SCOTT Sports SA, Rte du Crochet 17, CH – 1762 Givisiez, Switzerland.
CE Certified by:
ITALCERT
Notified Body No. 0426
v. le Sarca 336-20126
Milano, Italy
EU Directive: SCOTT bike helmets comply with the protective measures and security require-
ments provided for in European Directive 89/686/EEC. All homologated helmets bear corre-
sponding seals stating that all official tests have been passed. The seals are easily viewable and
may not be removed.
US Directives: SCOTT bike helmets comply with the protective measures and security require-
ments provided for in the United States Consumer Product Safety Commission. All homologat-
ed helmets bear corresponding seals stating that all official tests have been passed. The seals
are easily viewable and may not be removed.
ENGLISH - 6