Description Of The Controls - Fagor C-G920 Instrucciones De Instalación, Uso Y Mantenimiento

5.2.1

Description of the controls

5.2.2 Open table burners
5.2.2.1 Turning the open table burners on.
• Pilot ignition:
o Turn control M anticlockwise to the position Pilot
Next, use a flame to light the pilot.
o
• Burner ignition:
o To ignite the burners, press and rotate control M anticlockwise to the required position.
5.2.2.2 Turning the open table burners off.
Press and turn the M control to the position Pilot
•
5.2.2.3 Turning the open table burner pilot off.
Press and turn the M valve control to the OFF position .
•
5.2.3 Oven burner
5.2.3.1 Switching on the oven burner.
Pilot ignition
•
o Using the hook for lifting hotplates supplied with the oven, move the pilot access cover.
o Turn control H anticlockwise to the position Pilot
o Then press the oven pilot piezoelectric igniter several times until the flame of the pilot light is
stable.
o If the pilot light does not light up, it is possible to manually light it using a flame.
Burner ignition
•
o To ignite the burner, press and rotate control M anticlockwise to the required position.
5.2.3.2 Switching off the oven burner.
• Turn the H control to the position Pilot
5.2.3.3 Switching off the oven burner pilot light.
• Turn the H valve control to the Off position .
1. CONTROL M 2. CONTROL H
and hold button down.
, only the pilot will be lit.
and hold button down.
, only the pilot will be lit.
49