Problem
Smell of gas.
Ignition pilot does not
light.
Ignition pilot goes out.
Flame is yellow.
Fryer does not heat
It is not possible to adjust
the temperature of the oil.
NOTE: If a fault occurs and is not listed in the above table, please call the technical service.
The manufacturer reserves the right to modify the technical characteristics with prior
warning.
7. RECYCLING THE PRODUCT
The European standard 2012/19/EU on the disposal of electrical and electronic appliances, must
not be disposed of in the same way as solid urban waste. Old appliances must be disposed of
separately to optimise the percentage of materials recovered and recycled and to prevent
potential damage to health and to the environment. The crossed-out bin symbol is displayed on
all the products to remind users of their obligation to dispose of the product separately. For further
information on the correct disposal of electrical kitchen appliances, users may refer to the
relevant public authority or other retailers.
Cause
Occasional gas leak caused by flame
going out.
Spark generation does not work.
Air in pipes due to long period of
inactivity.
Thermocouple not heated enough.
Dirty burner.
Valve broken.
Limiting thermostat trips.
Operating thermostat broken.
Insufficient gas pressure.
Thermostat broken.
Thermostat bulb incorrectly positioned.
Solution
Close the gas supply and ventilate the
premises.
Manually switch on the fryer.
Contact your Technical Assistance
Service.
Repeat ignition process.
Repeat ignition process.
Contact your Technical Assistance
Service.
Contact your Technical Assistance
Service.
Contact your Technical Assistance
Service.
Contact your Technical Assistance
Service.
Contact your Technical Assistance
Service.
Contact your Technical Assistance
Service.
Contact your Technical Assistance
Service.
33